Search results

Here is another simple solution. Took me about 10 minutes. Need 4 cord tees from blinds couple of rubber bands and you are done. See img 1079 under Dave/Dixie photo gallery.. Don't know how to get picture here. Dave

I have had mine for over a year. Did not even start it till I had it a month, then started it on the fist pull. I am not sure where it was made. Costco gave me a two year warranty and Honda and Yamaha were only one year. I could buy two of these for the price of the above. Here are...

The generators you mentioned will handle this just fine. I purchased a Smarter Tools AP20001 which is similar to these models and used the Yamaha engine. It has the same 1600 w continuous and 2000 watt start up. You can purchase this at Costco for half what you will pay for the Honda or...

Check with a local propane supplier. They will have the parts.

I have a 2000 watt generator that I have converted to run on propane. It will still run on gasoline or natural gas. I got an email today from the maker of the kit so for any of you that are interested here is the link. http://www.on2url.com/lnk?MTIwNDI1MXwxNTAyNzg2NTV8cz0x This works...

Oregon has a lot of stupid laws but they tend to adopt the liberal ways of California. Can't win.

Well, I can attest to the value of the breakaway cable. On a recent trip going over a cattle guard at 70 mph trailer came loose and sparks were flying. All ok brakes set tongue ground down a little and needed to replace plug on trailer. Must say it got my attention. No damage to...

I don't think you would see any benefit from chains for your trailer. Chains are normally used on the drive wheels of your tow vehicle for traction.

PS Sieg your vsm.defocus link does not work

Sieg, I have been on vacation for the last month and have not kept up on the forumn.. The NW round up is being held in Mossyrock, Washington. I had planned on getting it to Silver Falls State Park but they changed the rules and said they were converting the group sites to all tent sites and...

I would second what Pat had to say above. We picked ours up a couple years ago in November and drove home to Oregon. Love to just hit the furnace for a few minutes before retiring and again in the morning. Heading to Arizona for a few weeks. The air conditioning should be welcome for the...

Re: The New Flat Panel TV There is definately a usb and HDMI port on the left side of the TV. You could connect your sat TV, TIVO, or other devises by this means. Blue ray DVD's do not work.

Re: The New Flat Panel TV You could use the hdmi or usb port off of the sat dish receiver. Dave

This looks interesting thought I would share this link. http://www.solardealz.com/Portable-Solar-Lock-p/sd-campsecurity.htm Dave

If any of you have a generator as I have a 2000 watt small generator that I rarely use but I have converted it to run off propane so I don't have to carry gasoline. I can also run it on natural gas or gasoline. If any one is interested in this a bought my kit from uscarb.com Dave

Sound like they are adjusted okay. Its possible one of the brake shoes are glazed from initially being over tight and now has a caused the shoes to not conform properly. The only way to remedy this would be to have the drums removed and checked by a reputable shop. Dave

I would be curious as to what you find out. I just don't know how you can adjust the brakes without first raising the wheels so you can adequately adjust the pads to the drum. Possibly Cary could chime in here if he has any suggestions.

I don't know how they can adjust the brakes without taking the wheels off the ground. It sounds like they made there best guess and left your brakes adjusted too tight. This might of glades the drums and causing the noise. You should probably have them looked at. At the least jack up one...

I know I didn't want to climb under the trailer and do it, however it took only about 10 to 15 minutes and its done for the year. Why not do it before the camping season begins and you will have one less thing to think about when you are preparing for your next outing. Dave

Brian Woods whho is the British Columbia ie Canada head of the International Division is having his second annual Tear Jearkers camp in at his home in Northbank, BC. We went last year and it is a lot of fun. For those of you who have not met Brian and his wife he is a custom hot rod builder...